-
-
How to set the WCS In Fusion 360 If you are starting a new set of toolpaths
-
-
-
In the MODEL Workspace mode, hide all other parts except for the part you want to use for the CAM Setup
-
-
-
Go to MANUFACTURE workspace mode. (You will see a new empty folder at the bottom of your Browser Tree named SETUPS)
-
-
-
A pop-up window will appear titled SETUP (Usually in the right side of your screen) and the part you will be using will now have a series of dots as well as a new X, Y, Z, Origin.
-
Additionally, in your Browser Tree you will now have a sub-folder under SETUPS. (If this is the first setup, it will be named Setup1 by default)
-
-
-
Click the POST PROCESS tab. In the Post Process tab, you will see PROGRAM and MACHINE WCS
-
-
-
In the WCS Field, enter the appropriate number and click OK to Exit
-
-
-
How to set the WCS IN Fusion 360 if you have already created a Setup and Toolpaths
-
-
-
A new pop-up will appear (usually on the right side of your screen)
-
-
-
In the WCS Field, enter the appropriate number and click OK to Exit
-
Almost done!
Finish Line